The Ordnance Soldiers Guide – This is a booklet that an Ordnance replacement soldier would have gotten at a replacement depot. It’s designed to be a quick refresher of content they would’ve learned in basic training.
Converting an Ohio Ordnance Works BAR into a WW2 BAR – Ohio Ordnance Works no longer sells BARs, but if you come across one, you can use this guide to help swap out parts for correct works to make it period correct. This is not a WW2 document, but a helpful one for reenactors.
M1917 Ammunition box plans – Plans on how to create the wooden M1917 ammo box used to hold different kinds of ammo
60mm M2 Mortar Firing Tables – FT60-D-2 – Print on ivory-coloured A4 paper (approximately 100-120gsm). Print on both sides to produce one Firing Table.
60mm M49a2 High Explosive Mortar Rounds Crate Stencil Markings Type 1 and Type 2 – Various stencils that would appear on different types of WW2 6mm mortar crates. Stencils support the m49a2 60mm H.E. mortar round.
More information on ammunition crates during WW2 see: WWII CRATES, BOXES AND CONTAINERS.
M1a1 Bangalore Torpedoes and Crate: There are a few guides out there, such as one from the US Militaria Forum, one from a group of reenactors out of New Zealand, and another one out of Belgium. However, these guides are very brief and don’t provide quality step-by-step instructions or a PDF.
See Bangalore Torpedo Training on YouTube for a great video on how they work.
Denver Arsenal 30 cal – Prints off 10 little cards that get inserted into a bandoleer. Print on brown cardstock.
Also, a 30 Cal Ball m2 1500 CTGS in Carton 1944 card that would go inside a crate.
Cardboard 5-round stripper clip insert instructions – notes on how to reproduce.
1/2 Pound TNT – Prints off two types of labels. A white one and a yellow one. I’m not sure which is more accurate. You can follow this 3D printing guide by ChrisNZ to print off the block and then wrap the paper around it.
1 Pound TNT – Prints off a white label. You can follow this 3D printing guide by ChrisNZ to print off the block and then wrap the paper around it. My guess is you need to print off two 1/2 pound blocks and then put them together and wrap the label around them.
Chemical Warfare Identification and First Aid Pocket Reference Gas Guide inside and outside | Describes what to do during a gas attack
5th Army Engineer Training March 1943 – Looks to be a cleaned-up version of a quick primer on how to lay a minefield using the Hawkins mine.
The M-E5 Series Flame Throwers May 1944 – A tactical discussion of the E5R1-5 and E4-5 Flame Throwers in tanks. E5R1-5 is installed in light tanks, and E4-5 is installed in medium tanks.
The doctrine is to use the flame throwers where infantry units are likely to cluster, such as in bunkers, heavy underbrush, and basements in an urban setting.
